APP-REBRANDRebranding of app (MVP) & display (later)otherNew PL incoming
%
N/A▾
Owner: New PL incomingMAB: 2026-05 (W26.22)Updated: 2026-06-10
Updated look & feel according to Qvantum's latest brand guidelines, across app (MVP) and display (later).
Plan
A modern interface increases perceived product quality and reliability, speeds up onboarding (less support), and consistent visuals across app/display strengthen brand recognition.
Maturity
%
Components
Sub-assemblies
Sourcing
Sample ETA
LT vol target
EKEBY-NPI-101Ekebydevelopmenton-timeAlexander C
%
low▾
Owner: Alexander CMAB: 2026-11-01 (W26.44)Updated: 2026-05-28SENL
New R290 Exhaust heat unit to comply with new regulations coming into force 2027
Plan
Project handover to Alexander on schedule Plan updated with new changes for front loading prototypes Operations have been presented with new time plan DFMEA initiated
Delivered since past report
Project handover to Alexander on schedule
Plan updated with new changes for front loading prototypes
Operations have been presented with new time plan
DFMEA initiated
Receive all parts for pre-test series build
Build pre-test series
Execute test plan on pre-test series
Maturity
%
Components
Sub-assemblies
Sourcing
Sample ETA
LT vol target
Budget & end date
Approved
Actuals
LBV
Budget (kEUR)
767
40
767
End date
2026-11-01
2026-11-01
—
QA-NPI-004QA D-A-CH series (cooling-first)conceptJulia
DACH-targeted cooling line — DE ask. Synchronised QS + QA cooling architecture in evaluation.
Plan
Two architectural directions on the table: standalone QA cooling unit vs. integrated QS/QA dual-mode. Customer interviews ongoing in DE; AT and CH distributors invited to scoping.
Architecture decision2026-07-01
Customer-discovery synthesis2026-07-20
Concept gate review2026-10-01
Maturity
8%
Components
9 / 110
Sub-assemblies
—
Sourcing
early
Sample ETA
Architecture-dependent — no samples committed
LT vol target
QE-CPI-007QE4 firmware 4.2 — adaptive heating curveproductionPM team
CPI release wrapping up: adaptive heating curve learns occupancy + outdoor temperature patterns to cut compressor cycling.
Plan
Field rollout to fleet 78 % complete. Customer feedback positive on quieter operation in shoulder seasons. SE field data confirms 6 % seasonal COP gain.
Fleet rollout to 100 %2026-06-02
Close v4.2 retro + lessons doc2026-06-04
Hand control to sustaining engineering2026-06-11
Maturity
100%
Components
120 / 120
Sub-assemblies
All
Sourcing
locked
Sample ETA
—
LT vol target
QE-MQE-M — new compressor unit for QE-4 and 6otherW26.22/W26.49Marcus Cederholm
%
N/A▾
Owner: Marcus CederholmMAB: 2026-05 (W26.22)Updated: 2026-06-10UKDENLSE
PHO date (from MAB/from PAB): W26.22/W26.49
New compressor unit for QE-4 and 6 — R290 refrigerant, backwards compatible, designed for a modular installation (split).
Plan
Certifications in August. Resources secured; sign-off from local PMs pending.
Maturity
%
Components
Sub-assemblies
Sourcing
Sample ETA
LT vol target
QE-NPI-001QE6 next-gen residential heat pumpindustrialisationon-trackPM team
QE6 v2 with improved COP/EER at 25 °C source inlet — ready to lock supplier list for the industrialisation ramp.
Plan
Tooling validation runs at Åstorp this week. Final compressor selection pending — GMCC option leading on noise. UK + DE markets aligned on the spec; NL deferred to QG.
Delivered since past report
Tooling validation run 2 complete
Noise margin against target now +1.8 dB(A)
GMCC compressor LOI signed
Tooling validation run 3 complete2026-06-05
Supplier list locked (compressor + heat exchanger)2026-06-12
MAB sign-off + transition to ramp planning2026-06-18
Maturity
78%
Components
94 / 120
Sub-assemblies
Refrigeration circuit, control panel (2 of 5)
Sourcing
mid
Sample ETA
Compressor GMCC — week 24
LT vol target
12000/y
Budget & end date
Approved
Actuals
LBV
Budget (kEUR)
1240
1118
1290
End date
2026-09-30
2026-10-14
—
QG-7-PQG-7-P — active and passive coolingotherW26.22/W26.22Marcus C
%
N/A▾
Owner: Marcus CMAB: 2026-05 (W26.22)Updated: 2026-06-10UKNLDEPL
PHO date (from MAB/from PAB): W26.22/W26.22
QG-6 with built-in passive cooling — integrated passive cooling module in the empty compressor module slot, all-in-one concept.
Plan
Certification covered as model under the subtype QG-6 certificate. Resources secured; sign-off from local PMs pending.
Wall-mount QG6M targeting MFH installs in DE — kitchen-closet form factor, < 600 mm width.
Plan
Mechanical concept locked. Two parallel control-board options under evaluation. NL has flagged urgent demand alongside DE; PL interested for commercial.
Commercial QG12 variant for Polish district-heating retrofits. Borehole installs only (no rig support yet).
Plan
Tooling for the commercial enclosure complete. Awaiting final TÜV sign-off on the higher-pressure hydraulic block. PL distributor partner training plan locked.
TÜV sign-off, hydraulic block2026-06-10
Distributor training programme starts (PL)2026-06-18
Industrialisation ramp gate2026-06-25
Maturity
88%
Components
108 / 122
Sub-assemblies
Hydraulic block, enclosure (3 of 4)
Sourcing
locked
Sample ETA
—
LT vol target
QG-NPI-006QG-XX heat-grid integration (NL + UK)conceptPM team
QH80 hydromodule that fits a 600 mm kitchen closet — driven specifically by NL market ask, with DE follow-up.
Plan
Two prototypes assembled, third in build. Buffer-tank-and-hydromodule split delivery option from NL feedback now baselined. Q-cloud connectivity scope agreed with SE.
Delivered since past report
Prototype 2 acoustic test passed
NL pilot install scheduled (Eindhoven, week 24)
DE field-test partner confirmed
Prototype 3 functional test2026-06-11
First customer pilot install (NL)2026-06-30
MAB review with NL + DE feedback2026-07-09
Maturity
64%
Components
78 / 122
Sub-assemblies
Hydromodule (3 of 4)
Sourcing
mid
Sample ETA
Sensor block — week 23
LT vol target
3500/y
Budget & end date
Approved
Actuals
LBV
Budget (kEUR)
540
312
555
End date
2026-12-18
2027-01-22
—
QP-14QP-14 — external passive cooling kitotherW26.22/W26.22Marcus C
%
N/A▾
Owner: Marcus CMAB: 2026-05 (W26.22)Updated: 2026-06-10UKNLDEPL
PHO date (from MAB/from PAB): W26.22/W26.22
External passive cooling kit — primarily for the QG-14 but compatible with the QG-7 range.
Plan
Certification covered as model under the subtype QG-6 certificate. Resources secured; sign-off from local PMs pending.
Maturity
%
Components
Sub-assemblies
Sourcing
Sample ETA
LT vol target
500/y
QP-7QP-7 — retrofit passive cooling for QG-7otherW26.22/W26.22Marcus C
%
N/A▾
Owner: Marcus CMAB: 2026-05 (W26.22)Updated: 2026-06-10UKNLDEPL
PHO date (from MAB/from PAB): W26.22/W26.22
Retrofit passive cooling for QG-7 — integrated passive cooling module in the empty compressor module slot, fits the all-in-one concept.
Plan
Resources secured; sign-off from local PMs pending.
Maturity
%
Components
Sub-assemblies
Sourcing
Sample ETA
LT vol target
1500/y
QS-NPI-008QS cooling extension for UK residentialprototypePM team
Adds active cooling to QS at residential scale — UK + NL ask; lays groundwork for QA cooling line in 2027.
Plan
Two field prototypes installed in UK pilot homes. Acoustic profile passing target by 2 dB(A). 25 °C source-inlet performance under final characterisation.
Owner: Alexander Cahlenstein (Paul Bridle)MAB: 2026-05 (W26.22)Updated: 2026-06-10NLDEUKPL
PHO date (from MAB/from PAB): W26.22/W26.28
Temperature and RH room sensor complemented with CO2 sensor for demand-controlled ventilation support.
Plan
New casing to support the CO2 sensor, new app version, new FW 1110. Plastic wall mount with vent for CO2 sensor — quotations coming in, to be decided on.